Assignment Example | Topics and Well Written Essays - 750 words - 39

Assignment ExampleUnder the center part of the knock down where entrust be a series of longitudinal beams, each 18 feett long, at 6 feet 6 inches center-to-center distance.The crosswise beams leave behind be connected to pairs of columns in the North-South direction. The longitudinal beams impart be placed on enlighten of the columns in the East-West direction. The roof depart be built using a series of sheets that depart be placed on top of the longitudinal beams to enclose the structure.To prepare the ground for the centre, approximately 650 cubic yards of dry land excavation and landscaping will needed to for the floor slab, test pool (see below), and foundations, and to reconstruct the parking parcel embankment. It is expected that a backhoe loader will be used to load a truck that will move all soil and any other weewee material encountered during construction.Access to the proposed Center will be through a pair of large double-doors on the East side, each 15 feet ma ssive and 10 feet high, and two pairs of double-doors on North side, each 8 feet wide and 7 feet high.There will be two key internal features. Firstly, there will be a Construction research laboratory (or workshop) for the concrete canoes, situated at the West end of the proposed Center, which will include overhead storage racks. The inner(a) drywall for this facility is to be estimated and constructed at a later date.Secondly, there will be a streak Pool for the concrete canoes, whose internal dimensions will be depth 6 feet, width 10 feet, length 100 feet a further 800 cubic feet of reinforced concrete will be required This will require a further 6000 cubic feet (23 cubic yards) of excavation, which will needed to the accounted for as part of the Estimates presented below. The ravel Pool will a rectangular trough shape with 1 foot wall and floor thicknesses. The Test Pool will positioned approximately centered in and underneath the floor slab. A water filter and pump